What oil does a 2014 Chevy Traverse take?
The 2014 Chevrolet Traverse with its 3.6-liter V6 engine requires Dexos1 Gen 2 5W-30 synthetic oil. In short, use Dexos1 Gen 2-rated 5W-30, preferably full synthetic, and plan for a replacement interval guided by the vehicle’s oil life monitor or the owner's manual.
Oil specifications and why they matter
The Traverse’s 3.6L V6 is designed to run on Dexos1 Gen 2-certified oil at a 5W-30 grade. Dexos is GM’s oil standard that ensures proper detergents, wear protection, and compatibility with modern engines and emissions systems. Gen 2 is formulated for newer engines and is generally backward-compatible with older Dexos1 oils, making it the recommended standard for 2014 models.
Dexos1 Gen 2 explained
Dexos1 Gen 2 oils are designed to resist high-temperature oxidation and maintain viscosity, helping to protect the engine and keep the emissions system clean. Using oil that meets Dexos1 Gen 2 certification is important for warranty considerations and optimal engine performance, particularly in modern GM engines like the Traverse’s 3.6L V6.
What to buy
To streamline your purchase, look for oils that carry the Dexos1 Gen 2 certification and the 5W-30 grade. The options below meet those requirements.
- Dexos1 Gen 2 5W-30 synthetic oil (recommended)
- Dexos1 Gen 2 5W-30 synthetic-blend oil (acceptable substitute)
When possible, choose a full synthetic formulation for enhanced protection and longer service intervals.
Capacity and maintenance intervals
The 2014 Traverse’s 3.6L V6 typically holds about five quarts of oil with a filter. Use the vehicle’s oil life monitor or the owner’s manual to determine replacement intervals, commonly ranging from roughly 7,500 to 10,000 miles under normal conditions. Severe driving, towing, or extreme temperatures may shorten that interval.
Additional considerations
If your Traverse uses a different engine configuration or you operate in extreme weather, verify the exact specification with the owner’s manual or a Chevrolet dealer. While Dexos1 Gen 2 5W-30 is the standard recommendation for most 2014 Traverse models, regional differences or updates to GM guidance may apply.
Summary
For a 2014 Chevy Traverse, the recommended oil is Dexos1 Gen 2 5W-30 synthetic. The engine capacity is about five quarts with a filter, and oil changes should follow the oil life monitor or manual guidance, typically every 7,500–10,000 miles under normal conditions. Always confirm specifics in the owner’s manual or with a trusted service professional.
What kind of oil does a Chevy Traverse 2014 take?
The 2014 Chevy Traverse requires SAE 5W-30 full synthetic engine oil. You will need approximately 6 quarts of oil and a new oil filter for a complete change. For extremely cold climates, SAE 0W-30 may be an alternative.
- Oil type: SAE 5W-30 full synthetic motor oil.
- Oil capacity: Approximately 6 quarts (with filter).
- Alternative for cold weather: SAE 0W-30 full synthetic can be used if temperatures fall below -20∘Fnegative 20 raised to the composed with power cap F−20∘𝐹.
- Recommendation: Always check your owner's manual for the most accurate information for your specific vehicle.
How much oil do you put in a 3.6 L V6?
The oil capacity for a 3.6L V6 engine varies by vehicle, but it is often around 5 to 6 quarts with a filter change. It is best to check your specific vehicle's owner's manual for the exact capacity, as it can differ between makes and models, with some requiring 5 quarts and others needing 5.9 or 6 quarts.
- Typical capacity: Many 3.6L V6 engines require approximately 5 to 5.9 quarts of oil for a full oil and filter change.
- Specific examples:
- Some Jeep and Dodge models with the 3.6L Pentastar engine use 5 quarts.
- Other models, such as the 2021 Jeep Grand Cherokee and certain 2024 Ram 1500 Classic models, use around 5.9 quarts.
- The 2023 Volkswagen Atlas 3.6L V6 requires 5.8 quarts.
- The 2016-to-current Jeep Grand Cherokee and Dodge Durango with the 3.6L Upgrade engine have a capacity of 6 quarts.
- Important note: Always consult your vehicle's owner's manual to confirm the exact oil capacity and viscosity recommendation for your specific car. After refilling, it's crucial to check the oil level before driving to ensure it is at the correct level.
What oil is recommended for a Chevy Traverse?
The oil type for a Chevy Traverse depends on the model year and engine, but most recent models require SAE 5W-30 full synthetic oil, and it's essential to use a Dexos1 Gen 2 or Gen 3 approved oil. Older or specific engines may require different viscosities, like SAE 0W-20. Always check your owner's manual for the exact specification for your vehicle.
General oil recommendations
- Viscosity: SAE 5W-30 is a common recommendation for many recent models.
- Type: Full synthetic oil is recommended for better performance and protection.
- Certification: Ensure the oil is approved by GM, looking for the "Dexos1" logo (such as Gen 2 or Gen 3).
- Quantity: The oil capacity is typically around 5.5 to 6 quarts, including the filter, but this can vary by model year and engine.
Important considerations
- Check your owner's manual: This is the most reliable source for your specific vehicle's oil type and capacity.
- Consider high mileage oil: If your Traverse has over 75,000 miles, high mileage oil can help reduce leaks and oil consumption.
- Consult a professional: If you are unsure about the correct oil, visit a dealership or trusted mechanic to ensure you use the right type.
What oil does a 2014 Chevy take?
Quick Reference Chart
| Silverado Generation | Common Engines | Recommended Oil |
|---|---|---|
| 2014–2018 | 4.3L V6; 5.3L & 6.2L V8 | 4.3L: 5W-30 (dexos1) • 5.3L/6.2L: 0W-20 (dexos1) |
| 2019–Present | 2.7L I4; 3.0L Duramax I6; 5.3L & 6.2L V8; (early) 4.3L V6 | 2.7L: 5W-30 (dexos1) • Diesel: 0W-20 (dexosD) • 5.3L/6.2L: 0W-20 (dexos1) • 4.3L: 5W-30 (dexos1) |
