What rims fit a 2013 Chevy Cruze?
The rims that fit a 2013 Chevy Cruze must match a 5x105 bolt pattern, have a compatible center bore, and use an appropriate offset. In general, 15–18 inch wheels that adhere to these specs will fit, with exact availability depending on trim and market.
Across 2013 Cruze trims and regions, wheel options vary. This article explains the core fitment requirements, outlines typical OEM sizes, and covers safe aftermarket upgrade considerations to help you choose rims that fit without clearance issues or safety concerns.
Key fitment basics for the 2013 Cruze
Before buying rims, it’s important to verify the essential specifications that determine compatibility. The list below covers the core fitment factors you should match.
- Bolt pattern: 5x105
- Center bore: 56.6 mm (hub-centric rings may be needed if the wheel bore is larger)
- Offest: typically +38 to +45 mm, depending on wheel width and model trim
- Wheel diameter range: commonly 15–18 inches for 2013 Cruze, varying by trim
- Wheel width: commonly 6.5"–7.5" for most upgrades
Conclusion: Ensuring the bolt pattern, bore size, offset, diameter, and width are matched, along with brake/caliper clearance, is crucial for safe installation. If you’re considering larger changes, consult a professional to confirm clearance and fitment.
OEM sizes by trim and common aftermarket options
There are trim-specific differences in factory wheel sizes, and many aftermarket rims in the 5x105 pattern are compatible when they meet offset and clearance requirements. The following overview offers a general guide to typical OEM ranges and widely used aftermarket choices.
- Common bolt pattern and bore: 5x105 and 56.6 mm center bore across many 2013 Cruze models
- Typical OEM diameter ranges by trim (market dependent): 15" to 18" wheels
- Common aftermarket options: 15"–18" diameter wheels in widths around 6.5"–7.5" with offsets near +38 to +45 mm
Conclusion: You can confidently pursue aftermarket rims within the 5x105 bolt pattern and similar bore/offset ranges, but always confirm exact measurements for your specific vehicle and market before purchasing.
Trims and practical upgrade notes
- Lower trims (e.g., LS/1LT) historically used smaller wheels, while higher trims (LT/LTZ) offered larger diameters as options
- Upgrading to larger wheels can affect ride quality, speedometer accuracy, and tire availability; confirm tire sizes and maintain the overall diameter when necessary
- Brake clearance can limit wheel width and spoke design; verify caliper clearance for the chosen wheel
Conclusion: When upgrading, start with rims that maintain the 5x105 pattern and 56.6 mm bore, and choose sizes that keep the overall tire diameter close to stock to preserve speedometer and gearing behavior. If in doubt, consult a professional or use a trusted fitment guide.
Smart upgrade considerations
- Use hub-centric rings if the new wheel’s center bore is larger than the hub to reduce vibration
- Ensure lug nuts and seat type match the new wheels (conical vs. ball seat) and that thread pitch and load ratings are appropriate
- Check brake clearance and suspension components for your planned wheel width and offset
- Verify load rating and speed rating of the wheels you intend to install
- Choose tires that maintain overall diameter and provide appropriate grip and wear characteristics for your driving needs
Conclusion: A careful, methodical approach to upgrades minimizes rubbing, fitment issues, and safety risks. When in doubt, consult a tire shop or use a reputable wheel-fitment resource to confirm compatibility before purchasing.
Summary: For a 2013 Chevy Cruze, look for rims with a 5x105 bolt pattern, a center bore around 56.6 mm, and an offset typically in the +38 to +45 mm range. Wheel sizes commonly span 15–18 inches, with trim-dependent OEM options and a broad market of aftermarket rims available that meet these specs. Always verify brake clearance, hub-centric requirements, and overall diameter to ensure a safe, proper fit.
What body style is a 2013 Chevy Cruze?
The Chevrolet Cruze is a compact car produced by General Motors from 2008 through 2023. It was designated as a globally developed, designed, and manufactured four-door compact sedan, complemented by a five-door hatchback body variant from 2011, and a station wagon in 2012.
How do you know what size rims will fit?
Only wheels and tires of the same diameter can be safely mounted together, meaning you can only mount a 16" tire on a 16" wheel. (PRO TIP: You can find your wheel's diameter on the back side of the wheel, usually stamped on one of the spokes.)
What size rims are on a 2013 Chevy Cruze?
The 2013 Chevrolet Cruze comes with several standard rim sizes, including 16-inch, 17-inch, and 18-inch options, depending on the trim level. The most common factory sizes are 16x6.5 inches for the LS trim and 17x7 inches or 18x7.5 inches for higher trims.
Common rim sizes for the 2013 Chevy Cruze
- 16-inch: Often found on the LS trim, with a common size being 16x6.5 inches.
- 17-inch: Frequently equipped on higher trims, with a typical size of 17x7 inches.
- 18-inch: Found on some models like the LTZ trim, with a common size of 18x7.5 inches.
Key specifications
- Bolt pattern: The bolt pattern is consistently 5x105mm across these models.
- Center bore: The center bore is 56.1mm.
- Offset: The offset varies by rim size and style but is often around +39mm for 16-inch wheels and +42mm for 17- and 18-inch wheels.
What rims will fit a Chevy Cruze?
Shop Online Tire Deals
What size rims fit on a Chevy Cruze? The Chevy Cruze has a range of stock rim sizes, including 15-inch rims, 16-inch rims, 17-inch rims and 18-inch rims. That means you've got a huge range of wheels to choose from when adding a personalized touch to your ride.
