What size is the oil plug on a Dodge Ram?
When it comes to performing an oil change on your Dodge Ram, knowing the correct size of the oil drain plug is essential. This small but crucial component ensures that the oil pan is sealed properly and prevents leaks. In this article, we’ll explore the typical oil plug sizes for Dodge Ram trucks and provide tips for handling this task efficiently.
Understanding the Oil Plug Size for Dodge Ram Models
The size of the oil drain plug on a Dodge Ram can vary depending on the model year and engine type. However, for most Dodge Ram trucks, the oil plug size is typically:
- 14mm or 16mm hex head: Common for many Dodge Ram 1500 models with gasoline engines.
- 3/8-inch square drive: Found on some older models or specific diesel engines.
- M14-1.5 or M12-1.75 thread size: Refers to the thread diameter and pitch, which is important if you need to replace the plug.
It’s always a good idea to double-check your vehicle’s owner’s manual or consult a trusted mechanic to confirm the exact size for your specific Dodge Ram model.
Steps to Identify and Replace the Oil Plug
If you’re unsure about the oil plug size or need to replace it, follow these steps:
- Locate the oil pan underneath your Dodge Ram. It’s typically positioned near the center of the vehicle, directly below the engine.
- Inspect the oil plug to determine its size. Use a wrench or socket set to test-fit the correct size.
- If replacing the plug, ensure you purchase one with the correct thread size and pitch (e.g., M14-1.5).
- Install the new plug securely, but avoid overtightening to prevent damage to the oil pan threads.
Properly identifying and replacing the oil plug ensures a leak-free seal and helps maintain your vehicle’s performance.
Tips for a Smooth Oil Change
Changing your oil at home can save time and money. Here are some additional tips to make the process easier:
- Always use the correct oil type and viscosity as recommended in your owner’s manual.
- Replace the oil filter during every oil change to ensure optimal engine performance.
- Dispose of used oil and filters responsibly by taking them to a recycling center or auto parts store.
- Inspect the oil plug washer or gasket for wear and replace it if necessary to prevent leaks.
By following these tips, you can keep your Dodge Ram running smoothly and extend the life of your engine.
Conclusion
Knowing the correct oil plug size for your Dodge Ram is a small but important detail that can make your oil change process much easier. Whether you’re a seasoned DIYer or a first-timer, taking the time to confirm the size and follow proper procedures will save you from potential headaches down the road. If you’re ever in doubt, don’t hesitate to consult a professional mechanic for assistance.
Frequently Asked Questions
What size is the oil drain plug on a 5.7 Hemi?
The factory drain plug has a 13mm head on it.
What size socket do I need for oil plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size is the oil socket on a Dodge Charger?
The thread size of the oil drain plug on a Dodge Charger is M14x1. 5mm. If you intend to change the OEM drain plug, then a magnetic oil drain plug kit is a good idea.
What size is the drain plug on a Dodge Ram?
The thread size of the oil drain plug on a RAM1500 is M14x1. 5mm.
Are oil drain plugs the same size?
All drain plugs are not the same because all drain pans are not the same. OE manufacturers have different designs when it comes to their vehicle, so naturally, oil drain pans, drain plugs and gaskets are different too.
How many quarts of oil does a 5.7 hemi take?
How much oil does a 5.7 Hemi need, and what is the best oil? The third-gen Chrysler/Dodge 5.7 Hemi V8 requires 7 quarts or roughly 6.6 liters for every oil change, and the numbers apply to all 5.7-liter Hemi V8 engines manufactured from 2003 onwards.
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size is the oil drain plug wrench on a Dodge Ram 2500?
Universal Hex 12 mm to 19 mm 8 in 1 Oil Drain Plug Wrench (2495K) by CTA®.
Where is the drain plug on a Dodge Ram 1500?
Brake pull the hood release handle and open the hood open your oil filler cap this will facilitate the flow of oil when draining you can then remove the skid plate if present to access the drain plug
What size socket for oil drain plug ram 1500?
13-millimeter socket
Once the oil is drained, reinstall the drain plug, threading it in a clockwise direction. Using a 13-millimeter socket and torque wrench, tighten the drain plug.
