What size socket is the oil drain plug on a Toyota Yaris?
The oil drain plug on a Toyota Yaris typically requires a 17mm socket to remove. This is a common size for many Toyota and other Japanese vehicle models, though the exact size can vary slightly depending on the year, model, and engine configuration of the Yaris.
Detailed Explanation
The oil drain plug is a critical component on any vehicle, as it allows the engine oil to be drained during routine maintenance and oil changes. On a Toyota Yaris, this plug is usually located at the bottom of the oil pan, and accessing it requires the use of the proper size socket wrench.
According to the information gathered from various automotive repair resources, the most common size socket needed to remove the oil drain plug on a Toyota Yaris is 17mm. This size is widely used across many Toyota models, as well as other Japanese car brands, due to the standardization of parts and components.
It's important to note that while 17mm is the typical size, there can be some variation depending on the specific year, model, and engine configuration of the Yaris. Some older or modified Yaris models may use a slightly different size, such as 16mm or 19mm. It's always a good idea to consult the owner's manual or refer to a repair guide specific to your vehicle to ensure you have the correct socket size before attempting to remove the oil drain plug.
Tips for Changing the Oil
- Ensure you have the correct 17mm socket wrench (or the size specified for your Yaris model) to remove the oil drain plug.
- Place a drain pan underneath the oil drain plug to catch the used oil as it drains.
- Loosen the plug slowly and carefully to avoid stripping the threads.
- Once the oil has fully drained, clean the plug threads and replace the gasket if necessary.
- Tighten the plug back in place using the 17mm socket, being careful not to overtighten.
- Dispose of the used oil properly, as it can be harmful to the environment if not handled correctly.
Following these steps and using the proper 17mm socket size will help ensure a successful oil change on your Toyota Yaris, keeping your vehicle running smoothly and efficiently.
What size are the nuts on a Toyota Yaris?
Thread size M12 x 1.5. 4 X ALLOY WHEEL NUTS - TOYOTA, YARIS. Fits all standard alloy wheels.
What size is the Toyota engine oil drain plug?
Dorman – Standard Engine Oil Drain Plug: M12-1.25 Thread, 14 mm Head, 1 Pack (Part No. 090-038CD)
What size socket do I need to drain my oil?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
What size is the drain plug on a Toyota Yaris?
With an outer diameter of 23mm, an inner diameter of 12.3mm, and a thickness of 2mm.
What size socket is a Toyota lug nut?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
What size is Toyota oil filter wrench?
64.3mm 14
64.3mm 14 Flute Oil Filter Wrench - Fits Toyota, Lexus, Honda.
What size socket is the oil filter on a Toyota Yaris?
Use the 65-14F socket. Use a ratchet wrench. Remove the oil filter.
What size is the oil drain plug on a 2011 Toyota Yaris?
Notes: Engine Oil Drain Plug. Original type valve. M12-1.25" Thread Size.
What size is the oil drain plug size?
Oil Drain Plug Standard M12-1.5, Head Size 17Mm.
What size are the wheel nuts on a 2007 Toyota Yaris?
Thread size: M12-1.50. Verify lug nut to wheel mating surface for proper and safe fitment.
