What type of oil does a 2013 Toyota Sequoia take?
The 2013 Sequoia requires SAE 5W-30 engine oil that meets API SN or newer and ILSAC GF-5 specifications. You can use a full-synthetic or synthetic-blend that meets these standards.
For the Sequoia’s 5.7-liter V8, this viscosity range is appropriate across a wide range of temperatures. Always verify the correct grade on the oil fill cap and in the owner’s manual, and select an oil that carries the API and ILSAC certifications. The oil capacity is roughly six quarts with a filter, and oil-change intervals vary with driving conditions and oil type.
Oil specifications to look for
Before listing the approved options, ensure the oil you buy matches these standards.
- Viscosity: SAE 5W-30
- Certifications: API SN or newer (such as SP) and ILSAC GF-5 or newer
- Oil type: Full-synthetic or synthetic-blend motor oil
- Recommended brands: Toyota Genuine Motor Oil 5W-30 or any equivalent that meets the above specs
Using oil that honors these specifications helps protect the engine and supports proper performance.
Practical notes
Seasonal and climate considerations
In extremely cold or hot climates, confirm whether your owner's manual recommends a slightly different viscosity, but for a typical American climate the 5W-30 remains the standard.
Summary
For a 2013 Toyota Sequoia with the 5.7L V8, use SAE 5W-30 engine oil that meets API SN or newer and ILSAC GF-5 specifications. Prefer a full-synthetic or synthetic-blend oil and Toyota Genuine Oil if possible. Always check the owner’s manual or the oil cap for the exact requirement and adhere to service intervals.
