Home FAQ

Where is the VSC button in Lexus?

Typically, the VSC OFF button in Lexus vehicles sits on the lower left side of the dash near the steering column, labeled either VSC OFF or TRAC OFF. The exact location varies by model and year.

Where to look: common locations across Lexus models

Before listing the usual spots, note that placement can differ between generations. Use this as a guide and check your owner's manual for the exact year and trim.

Lower-left area of the dashboard near the driver’s knee, where the VSC OFF button is most commonly found in sedans like the ES, IS, GS, and LS — look for the label “VSC OFF” or “TRAC OFF” and a stability-control icon.

Center console area near the gear shifter or drive-mode selector on some SUVs and crossovers (e.g., RX, NX) where the toggle has been moved to the central stack.

Infotainment or instrument-cluster menu on a few newer or hybrid models, where the off toggle may appear as an option within the vehicle settings rather than as a dedicated physical button.

If you still can’t locate it, consult the owner’s manual for your specific model/year or contact a Lexus dealership for precise guidance.

How to use the VSC OFF toggle

To disable stability control, press the VSC OFF button once. The VSC OFF indicator on the dashboard will illuminate. To re-enable stability control, press the button again; the light should turn off. In some models you may need to press and hold the button for a few seconds or perform a quick ignition reset to restore normal protection, depending on the year and trim.

Model-specific notes

Because Lexus designs change by generation, there are exceptions: newer trims or hybrid layouts may place the toggle differently or offer a software-based override. Always verify with your specific vehicle’s manual or a dealership if you’re unsure.

Summary

In most Lexus models, the VSC OFF button is found on the lower left dash near the steering wheel, with some variants located on the center console or within the instrument/infotainment system. The exact spot depends on the model and year, so check your manual if you can’t find it. Remember that turning off VSC reduces active stability protections, so use it only when necessary.

Where is the VSC button located?

The VSC (Vehicle Stability Control) button is typically located on the dashboard, often on the left side near the steering wheel, or in the center console near the gear selector. It may be labeled "VSC," "VSC Off," or "TRAC," and the icon can also be an image of a car swerving with lines underneath it. If you can't find it, refer to your vehicle's owner's manual for the specific location.

Where to look for the VSC button

Near the driver's side dashboard: Look for the button to the left of the steering wheel.
Center console: Check around the gear selector.
On the dashboard: It may be with other driver control buttons.

How to identify the button

Text: It could be labeled "VSC" or "VSC Off".
Icon: It might have an icon of a car with squiggly lines underneath it, representing a skid.

If you still can't find it

Consult your owner's manual: The manual will provide the exact location for your specific vehicle model.

Where is the VSC off button in a Lexus?

In most cases, it will be located close to the steering wheel, possibly a button to the left of the steering wheel. It will likley have the appearance of an automobile with lines underneath the car. Why would I want to turn the VSC button off on my Lexus when driving in Macon?

Is it safe to drive with the VSC light on Lexus?

This alert typically indicates an issue with the VSC system or its components. While you are not in immediate danger if the VSC light comes on, it's essential to address this warning promptly to ensure your Lexus continues to operate safely. Ignoring the warning could lead to decreased stability and traction control.

What is VSC on a Lexus?

VSC on a Lexus stands for Vehicle Stability Control, a safety feature that helps prevent skidding and loss of control in poor driving conditions by automatically applying the brakes to individual wheels and adjusting engine power. It is a key part of a Lexus's safety system and works in conjunction with the Traction Control (TRAC) system.

How VSC works

Applies brakes: It can automatically apply brake pressure to specific wheels to help steer the vehicle and prevent a skid.
Adjusts engine power: It can reduce engine power to help the driver maintain traction.
Works with TRAC: The Traction Control (TRAC) system focuses on preventing wheel spin during acceleration, while VSC intervenes when the vehicle's direction is not matching the driver's steering input.

VSC light on the dashboard

Briefly flashing light: Indicates that the VSC system is actively working to help you maintain control.
Steady light: Suggests that the VSC system has been turned off or there is a problem with the system. You may also see a "Check VSC" message on the dashboard.

When to turn VSC off

It is generally not recommended to turn VSC off, as it is a crucial safety feature.
However, you may need to temporarily turn it off if your vehicle gets stuck in mud or snow, as the VSC system can sometimes hinder your ability to get unstuck by cutting engine power.
As soon as you are unstuck, it is best to turn the system back on.

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.