How do you reset the TPMS on a Acura CSX?

To reset the Tire Pressure Monitoring System (TPMS) on an Acura CSX, you'll need to follow a few simple steps. The TPMS is designed to alert you when the tire pressure in one or more of your vehicle's tires drops below the recommended level. Resetting the system is necessary after changing a tire, rotating the tires, or when the TPMS light is illuminated on your dashboard.

Steps to Reset the TPMS on an Acura CSX

1. Park your Acura CSX on a level surface and turn off the engine.


2. Locate the TPMS reset button, which is usually found near the steering wheel or under the dashboard.


3. Press and hold the TPMS reset button for about 5 seconds until the TPMS light on the dashboard starts flashing.


4. Drive your Acura CSX for at least 20 minutes at speeds above 20 mph to allow the TPMS to recalibrate.


5. Once the TPMS light stops flashing and remains on, the reset process is complete.

If the TPMS light remains on or starts flashing again, you may need to check the tire pressure in each of your vehicle's tires and adjust them to the recommended levels. Consult your Acura CSX's owner's manual for the correct tire pressure specifications.

Troubleshooting TPMS Issues

If you're still having trouble resetting the TPMS on your Acura CSX, there are a few additional steps you can try:

• Check the TPMS sensors in each tire to ensure they are functioning properly.


• Inspect the TPMS wiring and connections for any damage or loose connections.


• Use a TPMS diagnostic tool to check for any error codes or issues with the system.


• If the problem persists, you may need to have the TPMS serviced by a qualified mechanic.

Resetting the TPMS on your Acura CSX is a straightforward process, but it's important to follow the steps carefully to ensure the system is properly calibrated and functioning correctly. By keeping your tires properly inflated and the TPMS working as intended, you can help improve your vehicle's fuel efficiency, handling, and overall safety.

Why is my tire pressure light still on after filling tires on my Acura?

When you properly inflate your tires, the tire pressure light usually goes off on its own. However, if you see that the TPMS light is still on, you can try these troubleshooting tips: Take a drive on a Clovis area highway at or above 50 mph for 10 minutes to reset the sensor for your tire light.

Where is the Acura TPMS reset button?

The Acura TPMS reset button is typically found under the steering wheel on the left side, but some models use a process on the infotainment display instead. For models with a button, ensure your tires are properly inflated, then turn the ignition to the "ON" position (without starting the engine) and press and hold the button until the TPMS light blinks twice. For models with a display, navigate to "Settings" > "Vehicle" > "TPMS Calibration" and press "Calibrate". 
For models with a physical button

1. Adjust tire pressure: Inflate all tires to the recommended pressure found on the sticker in the driver's side door jamb. 
2. Turn ignition on: Turn the key to the "ON" position without starting the engine. 
3. Locate the button: Find the button with the TPMS icon (a tire with an exclamation mark) to the left of the steering column. 
4. Press and hold: Press and hold the button until the TPMS indicator light on the instrument panel blinks twice. 
5. Drive to calibrate: The calibration process will begin once you start driving. 

This video demonstrates how to reset the TPMS on models with a physical button: 1mHondaYouTube · May 15, 2019
For models with a display audio system

1. Adjust tire pressure: Inflate all tires to the recommended pressure. 
2. Navigate the menu: Press the "Home" button on the display, then go to "Settings" > "Vehicle". 
3. Calibrate TPMS: Select "TPMS Calibration" and then touch "Calibrate". 
4. Wait for confirmation: The system will display a message and begin calibration. You may need to drive for about 30 minutes at speeds between 30 and 60 mph for the process to complete. 

This video demonstrates how to reset the TPMS on models with a display audio system: 57sFisher AutoYouTube · Mar 10, 2022
If the light remains on

• Check your spare: If your spare tire has a TPMS sensor, ensure it is also properly inflated and has been reset. 
• Drive to recalibrate: After adjusting tire pressure, the system often recalibrates automatically after you've been driving at highway speeds (above 50 mph) for about 10 minutes. 
• Consult your owner's manual: If you cannot find the button or the light still won't turn off, refer to your owner's manual for model-specific instructions. 

Where is my TPMS reset button located?

Process will begin if there's no button the procedure is done with the display audio. Begin by pressing the home. Button then touch settings touch vehicle next and then TPMS calibration.

How do you reset the TPMS on a 2011 Acura CSX?

Resetting Tire Pressure Lights in Your Vehicle
Your TPMS reset button will be underneath the steering wheel in your Acura, and pressing down on this button for a few seconds should reset the tire pressure light.