How much oil does a 3.5 L transit take?
The engine typically requires about six quarts (roughly 5.7 liters) of engine oil for a complete change with a new filter. Exact capacity can vary by model year and engine variant, so always check your owner's manual or with a dealer for the precise figure.
Understanding the capacity figure
Why numbers can differ
The Transit line has evolved across generations and global markets. Different 3.5 L configurations (such as turbocharged EcoBoost versus other 3.5 L variants) and variations by model year can lead to slight changes in capacity. Always base your fill on the exact engine code and the manual’s specification for your vehicle.
Practical guidance for oil changes
When performing an oil change, plan to add about 6 quarts (5.7 liters) of fresh oil to reach the full mark on the dipstick, assuming you replace the oil filter. Start with 5.5 quarts, then check the dipstick and add in small increments to avoid overfilling. Use the oil grade recommended by Ford for your year (commonly 5W-30), but verify for your specific model and climate. After running the engine briefly, recheck the level and top off if needed to reach the full line.
Summary
For most Ford Transit models with the 3.5 L EcoBoost engine, the standard oil capacity is about six quarts (5.7 liters) with a new filter. Exact figures can vary by year and engine variant, so consult the owner's manual or a dealer to confirm the precise capacity for your vehicle. Always use the recommended oil grade and fill to the full mark on the dipstick after a change.
