What is the bolt pattern on a Ford Pinto?
The Ford Pinto uses a four-lug wheel arrangement on a 4.5-inch bolt circle (114.3 mm).
Produced from 1970 to 1980 on a Ford Falcon-based platform, the Pinto's wheels were designed around a 4-by-114.3 millimeter pattern. This specification is the most common reference for owners seeking replacement wheels or tires, though it's always wise to verify for your specific vehicle and year, as production nuances can occur.
Bolt pattern specifics
The key facts you need to know about the Pinto's lug layout are summarized here for quick reference.
- Configuration: four-lug bolt pattern.
- Bolt circle diameter: 114.3 mm, also expressed as 4.5 inches.
- Typical production years and platform: 1970–1980 Pinto models built on the Ford Falcon-based platform.
With these basics in mind, you can determine wheel compatibility and avoid installation issues when replacing wheels or installing winter setups.
Verify bolt pattern on your Pinto
To confirm you have the correct specification for your particular car, use the measurement process below or consult official documentation.
Measurement method
- Park the car on a level surface and apply the parking brake. If you are checking a wheel that is on the car, chock the opposite wheel for safety.
- If you can access the lug nuts, remove the wheel or have a clear view of the lug holes on the hub.
- Measure the distance from the center of one lug stud to the center of the lug stud directly opposite it (across the wheel). This distance is the bolt circle diameter.
- Compare the measurement to 114.3 mm (4.5 inches). If it matches, your Pinto uses the 4x114.3 bolt pattern; if not, you may have a different pattern requiring different wheels or adapters.
Note: If you are uncertain about accuracy, you can also check the vehicle's service manual, manufacturer specifications, or a trusted wheel retailer's compatibility guides for your exact year and trim.
Summary
The Ford Pinto commonly uses a 4-on-4.5-inch bolt pattern (4x114.3 mm). This spec applies to most 1970–1980 models, but always verify for your specific vehicle to ensure proper fitment when shopping for wheels or tires.
What is the bolt pattern on a 1976 Ford Pinto?
Wheel Bolt Pattern (in.): 5x4. 5 in.
What has a 4x108 bolt pattern?
Cars with a 4x108 bolt pattern include many models from Ford, Volvo, and Peugeot, such as the Ford Escort, Focus, and Fiesta, as well as older Alfa Romeos and Saabs. You can also find this bolt pattern on various vehicles from other manufacturers like Mazda, Mercury, Citroën, and Audi.
Ford
- Escort: Most models
- Focus: Many models
- Fiesta: Many models
- Mustang: Models from 1974-1993
- Tempo: Most models
- Contour: Most models
- Mercury Cougar: Some models
Volvo
- 850: Most models
- XC70: Some models
- Other: Many older and newer models
Peugeot
- 106, 206, 306, 405: Many models
- 308, 3008, 5008: Many models
- Partner, Partner Tepee: Many models
Other makes
- Alfa Romeo: Older models like the GT and Spider
- Audi: Older models like the 80 and 90
- Saab: 900, 9000, and other models
- Mazda: Various models
- Mercury: Various models
- Citroën: Various models
- Abarth: 600e
What bolt pattern is a Ford Pinto?
Wheel Specifications: Wheel size: 14" x 8" Bolt pattern: 5 x 4-1/2" Backspacing: 4-1/2" Click here to learn how to measure Wheel Backspacing, Wheel Offset or Bolt Pattern.
What is the bolt pattern on a 1972 Ford Pinto?
Bolt Pattern: 4-4.25"
