What is Toyota Corolla bolt pattern?
The bolt pattern for a Toyota Corolla depends on the year and market. In practice, most modern Corollas use a five-lug pattern, commonly 5x100 mm, while some older or regional models have used 5x114.3 mm or even 4x100 in the past. Always verify the exact specification for your specific vehicle before buying wheels.
Bolt pattern basics
A bolt pattern, or PCD (pitch circle diameter), describes how many lug holes a wheel has and the diameter of the circle that passes through the centers of those holes. For Corollas, you’ll most often encounter systems with either four or five lugs, and with wheel circles around 100 mm or 114.3 mm, depending on the generation and market.
Patterns you may encounter on Corolla models
Over the years and across regions, the Corolla has used several lug-pattern configurations. The following are the patterns you’re most likely to encounter in the real world, with a brief note on where they appear.
4x100 mm – Found on some older generations and certain overseas markets. If you’re working with a very early Corolla, this four-lug setup may apply.
5x100 mm – The most common pattern for recent Corollas in the United States and many other regions; this five-lug, 100 mm bolt circle is widely supported by aftermarket wheels.
5x114.3 mm – Present on some late-1990s to early-2000s Corollas and in certain markets; less common on today’s U.S.-spec cars but possible with imports or regional variants.
Conclusion: If you’re replacing wheels or upgrading, always confirm the exact bolt pattern for your specific model year and market rather than assuming based on the model name alone.
How to confirm your Corolla's bolt pattern
To determine your exact bolt pattern, use these steps:
- Check the owner's manual or the door jamb sticker for wheel specifications, including lug count and bolt circle (for example, “5x100”).
- Count the number of lug holes on the wheel hub or look at the wheel itself to confirm 4 or 5 lug configuration.
- Measure the bolt circle diameter (BCD) by measuring the distance between the centers of two opposite lug holes; this identifies patterns such as 4x100, 5x100, or 5x114.3.
- Check the center bore size by measuring the hole in the middle of the wheel hub or the wheel bore; note that hub-centric rings or adapters may affect fit if there’s a mismatch.
- When in doubt, consult a dealership or a reliable wheel-spec database for your exact year and market.
With the correct bolt pattern confirmed, you can confidently select wheels and accessories that fit properly and perform as intended.
Summary
The Toyota Corolla’s bolt pattern is not fixed across all years or regions. It is commonly 4x100 or 5x100, with 5x114.3 appearing on some older or regional variants. Always verify the exact pattern for your specific vehicle before buying wheels or adapters.
