How many quarts of transmission fluid does a 2008 Chevy Tahoe take?
The 2008 Chevy Tahoe requires 4 quarts of transmission fluid to fill the transmission. This is the standard amount needed for this specific model and year of the Tahoe SUV.
Detailed Explanation
The 2008 Chevy Tahoe is equipped with a 6L80 6-speed automatic transmission. According to the vehicle's owner's manual and service information, the transmission fluid capacity for this model is 4 quarts.
When performing a transmission fluid change or top-up on a 2008 Tahoe, it's important to use the recommended type of transmission fluid. For this vehicle, the manufacturer specifies the use of Dexron-VI automatic transmission fluid.
Transmission Fluid Change Procedure
To change the transmission fluid on a 2008 Chevy Tahoe, follow these steps:
- Park the vehicle on a level surface and apply the parking brake.
- Locate the transmission fluid drain plug, usually on the bottom of the transmission case, and place a drain pan underneath.
- Unscrew the drain plug and allow the old fluid to fully drain out.
- Once drained, replace the drain plug and tighten it securely.
- Locate the transmission fluid fill plug, usually on the side of the transmission case.
- Using a fluid transfer pump, slowly add 4 quarts of the recommended Dexron-VI transmission fluid through the fill plug until it begins to drip out.
- Replace the fill plug and tighten it.
- Start the engine and let it idle for a few minutes, then recheck the fluid level and top up if necessary.
It's important to follow the manufacturer's recommended procedure and use the correct type and amount of transmission fluid to ensure the proper operation and longevity of the 2008 Chevy Tahoe's transmission.
How many quarts of transmission fluid does a 2007 Tahoe hold?
Automatic Transmission Fluid
Capacity: 5 quarts Initial Fill. Capacity: 4 speed 4L60-E Total Fill 11.2 quarts.
How many quarts of transmission fluid do I need for a 4l60e?
4L60-E: 11.2 quarts. 4L70-E: 11.2 quarts.
How many quarts of transmission fluid do I need for a 4L60e?
4L60-E: 11.2 quarts. 4L70-E: 11.2 quarts.
How many quarts does a 5.3 Chevy transmission take?
For Automatic Transmission: 6L80....AF6
| Capacity: | 6 speed With O Cooling 6L80 Total Fill 12.2 quarts. |
|---|---|
| Capacity: | 6 speed With Cooling 6L80 Total Fill 12.4 quarts. |
| Capacity: | 6 quarts Initial Fill. |
How much transmission fluid does a Chevy Tahoe need?
For Automatic Transmission: 10L80....ULV
| Notes: | (1) The WSS-M2C949-A specification recommended was developed by Ford and GM. Products meeting the specification are available under the DEXRON ULV and MERCON ULV tradenames. |
|---|---|
| Capacity: | 10 speed With O Cooler 10L80 Total Fill 11.5 quarts. |
How many quarts does a 2008 Tahoe 5.3 take?
The Chevy Tahoe oil capacity is based on the three engine options: 3.0L I-6 Diesel Turbo: seven quarts with oil filter. 5.3L V8: eight quarts with oil filter.
How many quarts does it take to fill an empty transmission?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car's manufacture and other criteria.
How much transmission fluid does a 2008 Chevy Tahoe take?
Capacity: 6 quarts (with filter). After refill check oil level.
How many quarts do I need to change my transmission fluid?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
Is 4 quarts of transmission fluid enough?
You might need 3 to 5 quarts of fluid for a standard automatic transmission car.
