What kind of CVT fluid does a Chevy Spark take?
The Chevy Spark does not use a CVT in its standard configurations. In the United States and most markets, the Spark relies on a conventional automatic transmission (a 4-speed automatic) or a manual transmission (5-speed). Therefore, there is no CVT fluid specification for the typical Spark. If you’re looking at a non-U.S. market variant that might offer a CVT, always consult the exact owner’s manual for the correct fluid type.
Understanding the transmission setup for the Spark is important because it determines the fluid required. While some readers expect every modern automatic to be a continuously variable transmission, the Spark’s common configurations use a traditional automatic. For any CVT-equipped version, fluid requirements can differ significantly from those for a conventional automatic, so refer to the market-specific manual or dealer guidance.
Does the Chevy Spark use a CVT?
In the United States, no. The Spark’s typical transmissions are a traditional automatic and a manual option, not a CVT. The automatic version is a conventional 4-speed design, while a 5-speed manual may be available in certain trims or markets. CVTs are not standard across the common Spark lineup.
Notes on non-U.S. market variants
Some international versions or specific model years offered in other regions could feature different transmissions, including CVTs. If your Spark is from a market where a CVT is offered, follow the CVT fluid specification listed in that vehicle’s manual or consult a local Chevrolet dealer for the exact fluid type and maintenance guidelines.
Fluid specification for Spark automatic transmissions
For Spark models that use a traditional automatic transmission, the recommended automatic transmission fluid is Dexron VI. This fluid is standard for many GM automatic transmissions of the modern era and is backward compatible with older Dexron formulations. Do not use CVT fluid in a non-CVT transmission, and always verify the fluid type against the specific manual for your year and market.
- Dexron VI ATF is the commonly specified fluid for GM automatics used in the Spark in most regions.
- Dexron VI is backward compatible with Dexron II/III formulations, which helps with older maintenance references.
- Always consult your owner's manual or a Chevrolet dealer to confirm the exact specification for your model year and market.
Before replacing or topping up automatic transmission fluid, keep these points in mind:
Concluding paragraph: If your Spark has the conventional automatic, use Dexron VI ATF as recommended by GM, and follow the manual for service intervals and level checks. If you have a CVT-equipped variant, rely on the CVT-specific fluid guidance from the manual or a dealer, as CVT fluids differ significantly from ATF requirements.
Summary: The Chevy Spark typically does not require CVT fluid because it uses a traditional automatic or manual transmission. For the automatic, Dexron VI ATF is the standard specification in most markets. Always verify the exact fluid type for your year and country in the owner’s manual or with a Chevrolet service professional.
How much CVT fluid does a 2015 Chevy Spark hold?
Capacity: CVT7 Total Fill 6.2 quarts.
What kind of transmission fluid does a 2013 Chevy Spark take?
The 2013 Chevy Spark transmission fluid type is Dexron VI for automatic transmissions, which are typically 4-speed or Continuously Variable Transmission (CVT) models. For manual transmissions, you need a 75W-90 GL-4 or other appropriate synthetic gear oil, according to the manufacturer's recommendations. Always consult your owner's manual to confirm the exact fluid type required for your specific vehicle.
Automatic Transmission
- Fluid Type: Dexron VI is the recommended fluid for automatic transmissions in the 2013 Chevy Spark.
- CVT Models: Some 2013 Spark models have a Continuously Variable Transmission (CVT) and require a specific CVT fluid.
- Capacity: A 4-speed automatic transmission has a total fill capacity of 5 quarts (4.8 quarts initial fill), but this can vary depending on the model.
Manual Transmission
- Fluid Type: A 75W-90 GL-4 synthetic gear oil is recommended for manual transmissions in the 2013 Chevy Spark.
- Capacity: The manual transmission capacity is 1.5 quarts (1.4 quarts initial fill) for a 5-speed manual transaxle.
Important Considerations
- Always check your owner's manual to ensure you have the correct fluid for your specific vehicle.
- Use the correct fluid type to ensure proper function and longevity of the transmission.
- If you are unsure about your transmission type, consult a qualified mechanic.
What is the difference between ns2 and ns3 CVT fluid?
NS2 and NS3 are distinct Nissan CVT fluids that are not interchangeable, with NS3 being a newer formulation developed for improved fuel economy that also offers better torque capacity and wear protection. NS2 fluid is older and has a different composition, often appearing green, while the newer NS3 is typically blue.
| Feature | NS2 CVT Fluid | NS3 CVT Fluid |
|---|---|---|
| Composition | Older formulation with different additives. | Newer formulation designed to meet modern efficiency requirements. |
| Purpose | Originally designed for older Nissan/Infiniti CVTs. | Specifically engineered for newer Nissan/Infiniti transmissions, especially to improve fuel economy. |
| Color | Often green. | Typically blue. |
| Performance | Provides stable and precise operation. | Offers higher torque capacity and wear protection. |
| Interchangeability | Not backward-compatible with NS3. | Not backward-compatible with NS2. |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_Bd8lacuNDfSgi-gPqZjqgAI_292';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
What kind of transmission fluid does a 2015 Chevy Spark take?
The 2015 Chevy Spark requires a CVT fluid because it uses a Continuously Variable Transmission. The recommended fluid is a GM-specific ACDelco CVT fluid, but other full synthetic CVT fluids may be compatible (e.g., Valvoline, Castrol, or O'Reilly brands). It's essential to check your owner's manual or consult the vehicle's specifications to ensure the correct fluid type is used.
Recommended fluids
- ACDelco CVT Fluid: Part #19260800 (US) or #19299096 (Canada).
- Valvoline CVT Fluid: A full synthetic CVT fluid from Valvoline is a suitable option.
- Castrol Transmax Full Synthetic Automatic Transmission Fluid: This is formulated for automatic CVT transmissions.
- STP CVT Full Synthetic Transmission Fluid: This is another full synthetic option for automatic transmissions.
- O'Reilly Synthetic Continuously Variable Transmission Fluid: This is a suitable alternative for your Spark's CVT.
Important considerations
- Check your owner's manual: Always refer to your vehicle's owner's manual to confirm the exact fluid type required.
- Use "full synthetic" fluid: The Spark's CVT transmission requires a full synthetic fluid, which is designed to meet the specific demands of this type of transmission.
- Avoid using the wrong fluid: Using a conventional automatic transmission fluid (ATF) in a CVT can cause damage to the transmission.
