How much oil should I put in my RAM 1500?
The recommended oil change interval for a RAM 1500 is typically every 5,000 to 10,000 miles, depending on your driving conditions and the manufacturer's recommendations. The amount of oil you should use will depend on the specific engine size and model of your RAM 1500.
Determining the Correct Oil Amount for Your RAM 1500
To determine the correct amount of oil for your RAM 1500, you'll need to consult your owner's manual or the information provided on the oil fill cap. The typical oil capacity for a RAM 1500 is:
- 3.6L V6 engine: 5 quarts (4.7 liters)
- 5.7L V8 engine: 6 quarts (5.7 liters)
- 3.0L EcoDiesel V6 engine: 7 quarts (6.6 liters)
It's important to use the recommended oil type and viscosity for your specific RAM 1500 model, as specified in the owner's manual. This will ensure optimal engine performance and protection.
Steps to Change the Oil in Your RAM 1500
- Park your RAM 1500 on a level surface and apply the parking brake.
- Locate the oil drain plug, typically located at the bottom of the oil pan, and place a drain pan underneath.
- Using a wrench, loosen the drain plug and allow the old oil to drain completely.
- Once the oil has drained, replace the drain plug and tighten it securely.
- Locate the oil fill cap, usually on the top of the engine, and remove it.
- Slowly pour the recommended amount of new oil into the fill hole, checking the dipstick periodically to ensure you don't overfill.
- Replace the oil fill cap and start the engine, allowing it to run for a few minutes.
- Check the dipstick again and add more oil if necessary to bring the level to the full mark.
Remember to dispose of the old oil properly and recycle it if possible. Following the manufacturer's recommendations for oil changes and using the correct amount of oil will help ensure the longevity and performance of your RAM 1500 engine.
What oil is recommended for RAM 1500 5.7 HEMI?
SAE 5W-20 synthetic blend
If you have a RAM 1500 with a 5.7L HEMI, you should use an SAE 5W-20 synthetic blend motor oil. Typically, RAM 1500 trucks take six quarts during an oil change.
How much oil does a 3.6 L RAM take?
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) - Mopar SAE 5W-30 engine oil approved to the manufacturer material standard MS-6395 may be used when SAE 5W-20 engine meeting MS-6395 is not available. |
|---|---|
| Capacity: | 5.9 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How much oil does a 1500 take?
Capacity: 8 quarts (with filter).
How much oil does a 5.7 L RAM 1500 take?
6.9 quarts
Begin filling the engine with the recommended Ram 1500 SAE 5W20 viscosity (or SAE 0W20 for 2022 and newer models) and MS-6395 oil quality specification engine oil. How much oil does the Ram 1500 use? The engine oil fill capacity for Ram 1500 5.7L Hemi is 6.6 liters or 6.9 quarts.
